Implementing Cisco IP Routing (ROUTE) 2.0 Expert Live with Encore
Overview/Description
Target Audience
Expected Duration
Lesson Objectives
Course Number
Overview/Description
This is an advanced course on Cisco routing configuration. Upon completion of this course students will be able to configure and optimize a routing domain using OSPF, EIGRP, BGP, PBR, IP SLA and configure redistribution when needed. This course covers routing for both IPv4 and IPv6.
Live training will focus on content within Modules 2-6. Students are expected to complete modules 1 and 7, and Module 6 lessons 1 through 3 by using the recorded training format. These recorded-only training sections can be reviewed within the Encore format’s thorough coverage or your Live Session Homework (Live Session + Live Session Homework or Encore required for completion). This allows the Live sessions to focus on the most challenging and critical material.
- Prerequisites
- Students attending this course should have a solid foundation in routing fundamentals, Cisco IOS basics, and Cisco routing basics. Attending the ICND1 and ICND2 classes or having the CCNA certification will fulfill these expectations.
- Certification
- This course offers the official training for the 2.0 Implementing Cisco IP Routing certification exam, which is a component exam for the CCNP routing and switching certification. Passing this exam will also refresh the CCNA certification, which expires after three years.
- Exams
- 300-101 ROUTE 2.0
- Included Labs
- Documenting your Topology
- Configuring EIGRP on R1 R2 R3
- Configuring EIGRP on R4 R5 R6
- Troubleshooting EIGRP Adj.
- Troubleshooting EIGRP Adj. Part 2
- Troubleshooting EIGRP Routes: Part 1
- Troubleshooting EIGRP Routes: Part 2
- Configuring EIGRP Passive interfaces
- Configuring EIGRP Route Summarization
- Configuring EIGRP Unicast Neighborships
- Configuring EIGRP Authentication
- Configuring a Static Default Route with EIGRP
- Using ISPA as the Primary Path with EIGRP
- Implementing the EIGRP Stub Feature
- Troubleshooting EIGRP Stub Routers
- Load Balancing with EIGRP
- Using Leak Maps with EIGRP
- Filtering EIGRP Routes with Distribute Lists
- EIGRP Convergence Timers
- Implementing Policy Based Routing Part 1
- Implementing Policy Based Routing Part 2
- Implement OSPFv2 Part 1
- Implementing OSPFv2 Part2
- Implementing OSPFv2 Part 3
- Advertising a Default Route
- Configuring OSPF Passive Interfaces
- Setting the OSPF Reference Bandwidth
- Configure OSPF Authentication
- Redistributing Connected Networks Into OSPF
- Suppressing Type 5 LSAs in Area 123
- Suppressing Type 5 and 3 LSAs in Area 123
- Suppressing type 5 LSAs in area 4567
- Suppressing Type 5 and 3 LSAs in area 4567
- Filtering OSPF v2 Routes with Distribute Lists
- Filtering Type 3 LSAs with Filter Lists
- Modifying the Cost of an OSPF Interface
- Configuring OSPF Inter-Area Route Summarization
- Configuring OSPF External Route Summarization
- Modifying the Metric of an OSPF External Route
- Modifying the OSPF Metric Type
- The OSPF Path Selection Process
- OSPF Virtual Links
- Troubleshooting OSPF: Part 5
- Troubleshooting OSPF: Part 1
- Troubleshooting OSPF: Part 2
- Troubleshooting OSPF: Part 3
- Troubleshooting OSPF: Part 4
- Troubleshooting OSPF: Part 6
- Redistribution Part 1: EIGRP to OSPF on R5
- Redistribution Part 2: EIGRP to OSPF on R6
- Redistribution Part 3: EIGRP to OSPF on R6
- Redistribution Part 4: OSPF To EIGRP on R5
- Redistribution Part 5: OSPF to EIGRP on R6
- Redistribution Issues Part 1
- Redistribution Issues Part 2
- Redistribution Issues Part 3
- Configuring EBGP on R3 and R4 to ISPs
- Configuring EBGP on R4, R5, and R6
- Configuring IBGP Peerings in AS 64501
- Configuring IBGP Peerings in AS 64500
- Solving Next Hop IP Issues in AS 64501: Part 1
- Solving Next Hop IP Issues in AS 64501: Part 2
- Troubleshooting BGP Issues in AS 64500 Part 1
- Troubleshooting BGP Issues in AS 64500 Part 2
- Advertising Networks with BGP: Part1
- Advertising Networks with BGP: Part2
- Advertising Summary Networks with BGP: Part 1
- Advertising Summary Networks with BGP: Part 2
- Redistribution Networks into BGP
- Manipulating BGP Path Selection: Weight
- Manipulating BGP Path Selection: Local Preference
- Manipulating BGP Path Selection: MED
- Manipulating BGP Path Selection: AS Path
- Configuring EIGRP for IPv6 on R1 and R2
- Conifguring EIGRP for IPv6 Passive Interfaces
- Configure EIGRP for Ipv6 on R3
- Implementing the EIGRP for IPv6 Stub feature
- Configuring OSPFv3 in Area 0
- Configuring OSPFv3 in Area 567
- Redistributing from OSPFv3 into EIGRP for IPv6
- Redistributing from EIGRP for IPv6 into OSPFv3
- OSPFv3 Stub Area
- OSPFv3 Totally Stubby Area
- Configuring the DMVPN Hub
- Configuring the DMVPN Spokes
- Using EIGRP over a DMVPN
- Solving Reachability Issues over DMVPNs
- Configuring Spoke to Spoke DMVPNs
- Configuring EIGRP on R1 R2 R3
- Skills
- This course provides instruction in the following:
- Configuration of EIGRP routing in a large network for IPv4 and IPv6
- Configuration of OSPF and OSPFv3 routing in a large network
- Configuration of redistribution between multiple routing protocols
- Configuration of policy based routing
- Integration with an ISP using BGP
- Securing a routing domain
- Configuration of OSPF and OSPFv3 routing in a large network
- Outline
- Implementing Cisco IP Routing 2.0
- Module 1: Basic Network and Routing Concepts
- Lesson 1: Differentiating Routing Protocols
- Lesson 2: Understanding Network Technologies
- Lesson 3: Connecting Remote Locations with the Headquarters
- Lesson 4: Implementing RIPng
- Module 2: EIGRP Implementation
- Lesson 1: Establishing EIGRP Neighbor Relationships
- Lesson 2: Building the EIGRP Topology Table
- Lesson 3: Optimizing EIGRP Behavior
- Lesson 4: Configuring EIGRP for IPv6
- Lesson 5: Discovering Named EIGRP Configuration
- Module 3: OSPF Implementation
- Lesson 1: Establishing OSPF Neighbor Relationship
- Lesson 2: Building the Link State Database
- Lesson 3: Optimizing OSPF Behavior
- Lesson 4: Configuring OSPFv3
- Module 4: Configuration of Redistribution
- Lesson 1: Implementing Basic Routing Protocol Redistribution
- Lesson 2: Manipulating Redistribution Using Route Filtering
- Module 5: Path Control Implementation
- Lesson 1: Implementing Path Control
- Module 6: Enterprise Internet Connectivity
- Lesson 1: Planning Enterprise Internet Connectivity
- Lesson 2: Establishing Single-Homed IPv4 Internet Connectivity
- Lesson 3: Establishing Single-Homed IPv6 Internet Connectivity
- Lesson 4: Improving Resilience of Internet Connectivity
- Lesson 5: Considering Advantages of Using BGP
- Lesson 6: Implementing Basic BGP Operations
- Lesson 7: Using BGP Attributes and Path Selection Process
- Lesson 8: Controlling BGP Routing Updates
- Lesson 9: Implementing BGP for IPv6 Internet Connectivity
- Module 7: Routers and Routing Protocol Hardening
- Lesson 1: Describing Routing Protocol Authentication Options
- Lesson 2: Configuring EIGRP Authentication
- Lesson 3: Configuring OSPF Authentication
- Lesson 4: Configuring BGP Authentication
- Lesson 1: Differentiating Routing Protocols
Target Audience
This course is intended for students who are looking for real-world routing knowledge, and those that are considering CCNP and CCIP certification. This course’s discussion of routing could also benefit early CCIE Routing and Switching candidates.
Expected Duration (hours)
40.0
Lesson Objectives
Implementing Cisco IP Routing (ROUTE) 2.0 Expert Live with Encore
LLCS0093